Recent Changes - Search:

Resources


IP PBX Systems


Telephony Switch


Phones


Access Gateway
Signaling Converter


Lawful Interception Recorder


Others


Discontinued Products


Main Domains


In Social Media


About Us
Contact Details





.

Xymphony_Programming_-_Port_For_Downloading_Automatically_Recorded_Conversations_Via_XTools

By factory default, this port is 9874. If desired, the default value can be modified to another. To do this, click on VoiceRecorder link in Homepage Ethernet paragraph.

The VoiceRecorder link opens Voice recorder settings page.

Edit the Voicerecorder port textbox for the desired port number and then click on OK button. Be aware that when OK button is clicked in Voice recorder settings page, modified parameters are stored into volatile memories but they are not activated. In order to activate the new parameters, these should to stored into nonvolatile memories and then the system should be restarted again.

If public (outside) access to automatically recorded conversations is required (i.e., archiving XTools for conversation records is located outside), NAT should be programmed such that the UDP port (set in Voice recorder settings page) is forwarded to the IP address of the Telesis system.

Note that it is also necessary to set Autorecording transfer protocol and Voicerecorder client IP address parameters appropriately within Voice recorder settings page in order to download automatically recorded conversations via XTools.

Print - Recent Changes - Search
Page last modified on June 18, 2010, at 08:22 AM EST
Subject to change without any notice. All rights reserved 2010 - Telesis A.S.
Iskitler Cad. No.68 Ankara, TURKEY. Tel: +90 312 3840540 Fax: +90 312 3840549 http://www.telesis-pbx.com