Recent Changes - Search:

Resources


IP PBX Systems


Telephony Switch


Phones


Access Gateway
Signaling Converter


Lawful Interception Recorder


Others


Discontinued Products


Main Domains


In Social Media


About Us
Contact Details





.

Xymphony_Programming_-_Basic_Ethernet_Properties

The ethernet properties of a Telesis system can be programmed with using Basic link in Homepage Ethernet paragraph.

The factory default values of some basic ethernet properties are:

  • IP address: 10.0.0.12
  • Subnet mask: 255.255.255.0
  • Default gateway: 10.0.0.138

Homepage of the Telesis system is accessed with the web address of http ://10.0.0.12/xp.asp

When OK button is clicked on, the parameters are stored into volatile memories but they are not activated. In order to activate the modified parameters, these should to stored into nonvolatile memories and then the system should be restarted again. To do this, first operate Save command in Homepage System paragraph, and then operate Reboot command in Homepage Control Program paragraph.

Print - Recent Changes - Search
Page last modified on January 17, 2012, at 05:58 AM EST
Subject to change without any notice. All rights reserved 2010 - Telesis A.S.
Iskitler Cad. No.68 Ankara, TURKEY. Tel: +90 312 3840540 Fax: +90 312 3840549 http://www.telesis-pbx.com