Recent Changes - Search:


IP PBX Systems

Telephony Switch


Access Gateway
Signaling Converter

Lawful Interception Recorder


Discontinued Products

Main Domains

In Social Media

About Us
Contact Details



Before downlading CMDR records with CMDR download, be sure that your Telesis Xymphony system has been enabled for the purpose.

Connect to your Telesis system with a web broswer.

The Cmdr link in Ethernet paragraph opens Cmdr settings page.

By factory default, the CMDR port is 9876. If desired, the default value can be modified to another. Edit the XTools/Monitor(UDP)Cmdr(TCP)port textbox for the desired port number and then click on OK button. Be aware that when OK button is clicked in Cmdr settings page, modified parameters are stored into volatile memories but they are not activated. In order to activate the new parameters, these should to stored into nonvolatile memories and then the system should be restarted again.

Note that it is also necessary to set Cmdr protocol to XTools and XTools Cmdr client IP address to the IP address of the PC, which runs XTools.

After Telesis Xymphony system has been programmed appropriately, edit <Xymphony URL>:<port number> into the edit box to the left.

Then click on Open button.

While the XTools establishes the communication, YELLOW indicator is displayed on bottom left corner.

If the communication fails for any reason, the indicator on the bottom left corner returns RED. Then check IP connection of your PC, CMDR parameters in Xymphony etc.

If the communication is successfully established, the indicator on the bottom left corner becomes GREEN. And if there are CMDR records in the buffer of Telesis Xymphony system, these starts to be downloaded and also shown in download window. Downloaded or collected data is stored in the xtools.mdb file automatically. Xtools.mdb is a database file supported by Microsoft Access. It has call and information records. Maximum xtools.mdb file size is limited to 1GB. If xtools.mdb approaches to the limit; XTools should be stopped, xtools.mdb should be archived (with copying to another directory, renaming etc.) and a new mdb should be created with re-running XTools.

The same XTools may connect up to four different Telesis Xymphony systems and collect their CMDR records at the same time. Then the created database file is common but records are marked with Xymphony IP addresses.

At anytime, connection to a Telesis Xymphony system may be terminated with using the Close button.

The Scroll button enables or disables the scroll of data in the current CMDR download window.

Internal Links

Print - Recent Changes - Search
Page last modified on August 07, 2013, at 02:23 AM EST
Subject to change without any notice. All rights reserved 2010 - Telesis A.S.
Iskitler Cad. No.68 Ankara, TURKEY. Tel: +90 312 3840540 Fax: +90 312 3840549