Recent Changes - Search:

Resources


IP PBX Systems


Telephony Switch


Phones


Access Gateway
Signaling Converter


Lawful Interception Recorder


Others


Discontinued Products


Main Domains


In Social Media


About Us
Contact Details





.

VTS480_Firmware_Upgrade

To make the firmware upgrade, the VTS480 is powered up with the spkr key pressed hold. Be aware that the spkr key must be hold pressed until 10.0.0.112 is displayed on the bottom-right corner of its LCD display. Then spkr key is released. The VTS480 starts in boot mode. The IP address of the VTS480 returns to 10.0.0.112. and the port address is 80. Connect to the VTS480 set with using a web broswer. When the connection is established, Bootloader page is displayed. Click on the Upload Firmware link. And upload the new firmware to the VTS480. When the uploading completes, click on the Bootload firmware link. The VTS480 starts with the new firmware.

Print - Recent Changes - Search
Page last modified on February 15, 2012, at 01:23 AM EST
Subject to change without any notice. All rights reserved 2010 - Telesis A.S.
Iskitler Cad. No.68 Ankara, TURKEY. Tel: +90 312 3840540 Fax: +90 312 3840549 http://www.telesis-pbx.com