Recent Changes - Search:

Resources


IP PBX Systems


Telephony Switch


Phones


Access Gateway
Signaling Converter


Lawful Interception Recorder


Others


Discontinued Products


Main Domains


In Social Media


About Us
Contact Details





.

PX24N_Rev_7_Warnings_For_Owners

Be Aware

  • Please read all documentation in this wiki carefully.
  • Avoid exposure to heat sources or direct sunlight for your PX24N rev.7 IP PBX.
  • You may clean only the surface of your PX24N with a damp dust-cloth.
  • Never use any chemicals for cleaning.
  • Be careful not to spill any liquid on your PX24N.
  • Be careful to place your PX24N on a flat and nonvibrating, stable surface. Dropping the equipment may cause irrepairable damage.
  • Be careful to place your PX24N away from:
    • High voltage lines, smoke, dust, gas or radiation (such as a generator, photocopier etc.)
    • Radio equipment that generates or emits high level signals
    • Sever, pipes, or valves that could leak or cause condensation
  • Never connect any connectors on your PX24N to the MAINS or any other high voltage or current sources.
  • Always use the original mains power adapter with your PX24N.
  • Your PX24N does not contain any parts for maintenance. In case of any failure, do not open any covers of your PX24N. Please contact your local Telesis Dealer for his assistance.
  • Do not loosen any screws on your PX24N.

More About Cleaning

You may clean your PX24N if it is necessary only. Disconnect all cords, wires and mains power adapter from the body of your PX24N before cleaning. Clean only the surface of your PX24N with a damp dust-cloth . Never use any chemical cleaners (liquid or spray). Make sure the surface is dry before re-connecting the power and line cords.

More About Maintenance

Your PX24N does not contain any parts for periodic maintenance. Consequently, periodic maintenance is not a condition at all. However, you may prefer (or need) some maintenance of your PX24N for some reason. Please contact your local Telesis Dealer for his assistance then. In any case, never do this by yourself. Do not open any covers of your PX24N. Do not untighten any screws on your PX24N.

Recommended Environmental Conditions

  • Temperature range: 0-40 C
  • Humidity range: %0-85 (non-condensing)
Print - Recent Changes - Search
Page last modified on October 04, 2016, at 12:35 AM EST
Subject to change without any notice. All rights reserved 2010 - Telesis A.S.
Iskitler Cad. No.68 Ankara, TURKEY. Tel: +90 312 3840540 Fax: +90 312 3840549 http://www.telesis-pbx.com