Recent Changes - Search:

Resources


IP PBX Systems


Telephony Switch


Phones


Access Gateway
Signaling Converter


Lawful Interception Recorder


Others


Discontinued Products


Main Domains


In Social Media


About Us
Contact Details





.

Licensing_Of_An_X1_With_Redundant_Control_Unit

There are two options. One is installing licenses to both units. If you choose this option, you should purchase licenses for both control and switching units. With this option:

  • You should pay for licenses to be installed in both control and switching units
  • Both control and switching units operate independently
  • If any of the control and switching unit goes out of order (main or redundant), features that have been licensed do not expire
  • If any of the control and switching unit is switched off permanently or uninstalled (main or redundant), features that have been licensed do not expire

Second and mostly preferred option is licensing the main control and switching unit only and allow the redundant control and switching unit to share those licenses. It is called License Sharing Option. With this option:

  • You pay only for licenses to be installed in the main control and switching unit
  • Operation of the redundant control unit does depend on the operation of the main control&switching unit
  • If the redundant control and switching unit goes out of order, features that have been licensed will not expire
  • If the redundant control and switching unit is switched off permanently or uninstalled, features that have been licensed will not expire.
  • If the main control and switching unit goes out of order, features that have been licensed expire after some weeks period following the failure. During this period, the main control and switching unit needs to be serviced and operated again.
  • You can not switch off the main control and switching unit permanently
  • You can not uninstall the main control and switching unit

In your original purchase order, you may indicate your exact configuration, requirement for the redundant operation and licenses to be installed for a particular X1 and we may ship the control and switching units of the X1 with the licenses installed at the factory accordingly. Or you may install an X1 without any licenses in its control and switching units on the field. Then you may send us the XID file prepared for the X1 for licensing. Then we return you with the XOP file to license this particular system.

License Sharing Option for X1 Systems with Redundant Control and Switching Unit

  • The main control and switching unit should be operating in active mode
  • The redundant control and switching should be operating in stand-by mode
  • Connect to the main control and switching unit of the X1
  • Go to the licensing page

Then mark Redundant control unit Mark or edit other features to be licensed. Save the XID file and send it to us. When you get the XOP file, download it to the main control and switching unit again.

Internal Links

Print - Recent Changes - Search
Page last modified on June 07, 2010, at 03:47 AM EST
Subject to change without any notice. All rights reserved 2010 - Telesis A.S.
Iskitler Cad. No.68 Ankara, TURKEY. Tel: +90 312 3840540 Fax: +90 312 3840549 http://www.telesis-pbx.com